SX080

It is a linear shaft motor with simple and versatile features and performance that are different from traditional linear motors.

・High-speed operation (reciprocating motion)
・High-precision positioning (fully closed loop control)
・ Low ripple
・ High speed and stability (high response, high rigidity)
・ Mechanical design is the same as ball screw
・ Implement the multi-axis motion
・ Parallel or tandan control by one driver
・ Excellent durability due to non-contact motors (reduced maintenance costs)
・ Low dust emissions
・ It can also be used in harsh environments such as water, oil, pollution, and dust (optional)

Specification

Parameter Unit SX080D SX080T SX080Q
Specification Continuous Force*1 N 2.1 3.1 4.1
Acceleration Force N 8.3 12 16
Continuous Current*2 Arms 0.84 0.84 0.84
Accel. Current Arms 3.4 3.4 3.4
Recommended load to inertia ratio Less than 30 times mass of the shaft motor
Heat resistance grade 130℃(Grade B)
Structure Open type (protection level: IP00)
Environmental conditions Temperature Ambient 0°C to 40°C (free from freezing )
Storage –20°C to 60°C (free from freezing)
Humidity Ambient Less than 85% RH (free from condensation)
Storage Less than 85% RH (free from condensation)
Usage environment Indoors (no direct sunlight)
No corrosive gases, flammable gases, oil mist, dust
Altitude Below 1000m altitude
Dimension Force length mm 40 55 70
Forcer height/width mm 20 20 20
Weight kg/f 0.05 0.05 0.07
Air gap mm 0.5 0.5 0.5
Shaft outer diameter mm 8 8 8

*1: Specifications at room temperature 20°C. This is the value when the surface temperature of the coil inside the mover rises to 110K.
*2:Value when no radiator or heat sink is installed.

V-T Diagram

Dimension